Challenger Lifts

Challenger Lifts’ ALI/ETL Certified Versymmetric® 2-Post Lifts maximize your revenue potential by having the flexibility to raise vehicles both symmetrically and asymmetrically in a single service bay. 10,000 lb. Versymmetric® 2-Post automotive lifts can accommodate just about anything that comes in for service.

Versymmetric® 2-Post lifts are equipped with one of three Versymmetric® arm configurations. Take a look at the benefits of each and see which arm configuration best meets the needs you require of your next automotive lift:

Offset 3-stage front arms + 3-stage rear arms

- 2-Post Lift Model CL10V3

Maximum arm sweep, arm retraction and reach
Offset front arms provide single sweep spotting of virtually any vehicle
Meets OEM recommended pick up points of the widest range of vehicles including:
- Vehicles with designated outside pick up points
- Wider vehicles
- Low profile vehicles
- Both short and long wheelbases
- Uni-body design vehicles
Lifts vehicles with a symmetric or asymmetric center of gravity

Offset front arms

- 2-Post Lift Model CL10

Wide arm sweep with excellent arm retraction and reach
Offset front arms provide single sweep spotting of virtually any vehicle

3-stage front arms

- 2-Post Lift Models VS10 and E10

Wide arm sweep with excellent arm retraction and reach
Meets OEM recommended pick up points of most vehicles
Lifts vehicles with a symmetric or asymmetric center of gravity

Models available:

CL10series - CL10 and CL10V3 - 10,000 lb. lifting capacity
- CL10 arm configuration: Offset 2-stage front arms
- CL10V3 arm configuration: Offset 3-stage front arms + 3-stage rear arms
CL10 & CL10V3series Specification Brochure

VS10 - 10,000 lb.lifting capacity
- VS10 arm configuration: 3-stage front arms
VS10 Specification Brochure

E10 - 10,000 lb.lifting capacity
- E10 arm configuration: 3-stage front arms
E10 Specification Brochure

Four Post Challenger Lifts

Cable Lifting

Additional features include automatic wheel chocks, wheel curbs and anti-skid coating on ramps and runways to minimize slipping, etc.With optional rolling jacks, bolt-on alignment kit, oil drain pan, etc., you’ll be able to accommodate just about anything that comes in for service - see specification brochure for more details.

Models available in:
78″ - The Highest Rise in the Industry
12,000 lbs. lifting capacity - 10′ 1″ overal width - 20″ runways (40NFX)
12,000 lbs. lifting capacity - 18′ 3″ overall length - 20″ runways (40SFX)
12,000 lbs. lifting capacity - 20′ 4″ overall length - 20″ runways (40EFX)
12,000 lbs. lifting capacity - 22′ 8″ overall length - 20″ runways (40XFX)

40series Four Post specification brochure

Download Adobe Acrobat Reader For Free

Open and Closed Front Alignment Racks

Additional features include 2 rolling jacks, multi-position work step, air operated safety lock system - see specification brochure for more details.Models available in:
78″ - The Highest Rise Height in the Industry
Open-Front Alignment Racks:
12,000 lbs. lifting capacity - 20′ 9″ overall length - 20″ runways (AR40EAO)
12,000 lbs. lifting capacity - 23′ overall length - 20″ runways (AR40XAO)

Closed-Front Alignment Racks:
12,000 lbs. lifting capacity - 20′ 4″ overall length - 20″ runways (AR40EAX)
12,000 lbs. lifting capacity - 22′ 8″ overall length - 20″ runways (AR40XAX)

Open and Closed-Front Alignment Racks Specification Brochure

Quick Lube Lift

Exclusive features include walkways, handrails, front gate, moving ladder with wheels, oil drain pan, diamond plated ramps and runways to minimize slipping, etc.

Model available in:
12,000 lbs. lifting capacity - 21′ or 23′ 10″ overall length - 22″ runways (44012LR)

Challenger Lifts 44012LR / 44012DLR Four Post Lift Product Sheet

---

Click the link below to download the Challenger Lifts Four Post lift
Accessories Sheet

Challenger Lifts Four Post Lift Accessories Sheet

Heavy Duty Challenger Lifts

Heavy Duty 2 Post Lifts

All Heavy-Duty 2-Post Lifts are symmetric lifting and cable equalized. Exclusive features include padded overhead cut-off bar, heavy-duty adjustable rubber pad truck adapters, single-point air actuated lock release and a 60″ lifting carriage just to name a few.

Models available in:
12,000 lbs. lifting capacity - 13′ 8″ overall height (12000)
12,000 lbs. lifting capacity - 14′ 8″ overall height (12001)
12,000 lbs. lifting capacity - 15′ 8″ overall height (12002)
15,000 lbs. lifting capacity - 14′ 6″ overall height (15000)
15,000 lbs. lifting capacity - 16′ 6″ overall height (15002)
18,000 lbs. lifting capacity - 14′ 6″ overall height (18000)
18,000 lbs. lifting capacity - 16′ 6″ overall height (18002)

12000/15000/18000 Heavy Duty 2-Post Lift Specification Brochure

Download Adobe Acrobat Reader For Free

Heavy Duty Four Post Lifts

All Heavy Duty 4-Post Lifts use a mechanical/electrical drive system with a heavy-duty chain for lifting and equalization.

Model available in:
18,000 lbs. lifting capacity - 21′ 4″ overall length - 22″ runways (44018)
30,000 lbs. lifting capacity - 25′ 1 5/8″ overall length - 24″ runways (44030)

Exclusive features include recessed turning radius gauge cutouts, concealed retractable work platforms and wheel curbs on the inside of runways. Optional rolling jacks and turntables also available.

Model available in:
18,000 lbs. lifting capacity - 21′ 4″ overall length - 22″ runways (44018AR)
30,000 lbs. lifting capacity - 24′ 7 1/2″ overall length - 24″ runways (44030AR)

44018 - 44030 Series Heavy Duty 4-Post Lift Specification Brochure

Heavy Duty Four Post Lifts

All Heavy-Duty 4-Post Lifts use a mechanical/electrical drive system with a heavy-duty chain for lifting and equalization. Dual cylinders provide stable lifting even with uneven loads. Overall runway lengths can be customized at time of order. Please consult factory for details.

Model available in:
40,000 lbs. lifting capacity - 36′ overall length - 32″ runways (44040)
50,000 lbs. lifting capacity - 36′ overall length - 32″ runways (44050)
60,000 lbs. lifting capacity - 36′ overall length - 32″ runways (44060)

44040/50/60 Series Heavy Duty 4-Post Lift Specification Brochure

Short Rise Pad Lifts

Portable Midrise Lift - MR6

Challengers Swing Arm Design Midrise Lifts have a 53-1/4″ rise height with
mechanical locks that engage at 7 different positions. Includes a set of four high
adapters and 4 low adapters.Models available in:
6,000 lbs. lifting capacity - electric/hydraulic motor (MR6)

MR6 specification brochure

Short-Rise Lift - SRM10

The SRM10 is an ideal addition to any shop that performs brake and tire service. This 10,000 lb capacity short-rise lift comes standard with built-in lug nut trays conveniently located in the base of the lift for quick efficient service.Models available in:
10,000 lbs. lifting capacity - electric motor
SRM10 Specification Sheet

		Automotive Lift Accessories 6″ and 10″ Slip-On Extension Pads Placed under car for added height Luxury Adapter Special lifting pads to accommodate luxury vehicles. Pads slip over female portion of swing arm and can be adjusted to reach dedicated pick-up points on vehicle Work Station Air/electric power station with filter regulator. Air hose not included. 1′ and 2′ Extension Column Height Easily installed on Two Post lift for increased extension. Indicate lift model when ordering. Alignment Adapters Allows Two Post lifts to be adapted for alignment work. High StandsHigh Stands should be used when removing heavy components from the vehicle such as engines, transmissions, differentials. Rated capacity 4,000 lbs. per pair. Click on the linkd below to download Automotive Lift Accessories Sheets Versymmetric® 2-Post Lift Accessories Sheet Challenger Lifts 4-Post Lift Accessories Sheet Challenger Lifts Inground Lift Accessories Sheet